You are viewing 1 of 2 articles without an email address.

All our articles are free to read, but complete your details for free access to full site!

Already a Member?
Login Join us now

Getting LEDs “IoT ready” with new alliance

Standardising an interface between any luminaire and any IoT sensor allows the sensors to be easily added or upgraded at any point in time

The alliance will help to make smarter buildings with smarter lighting
The alliance will help to make smarter buildings with smarter lighting

Leading lighting and LED driver manufacturers, Internet of Things (IoT) technology companies, and industry groups have set up the IoT-Ready Alliance to establish a standard for LED light fixtures.


The alliance wants to set industry standards that will enable LED light fixtures to be “IoT-Ready”, facilitating a quick and easy installation of advanced IoT sensors -- as straightforward as changing a light bulb.


This will also enable building operators to easily upgrade the sensors, ultimately future-proofing their buildings as IoT technology continues to advance at a much more rapid pace than that of LED fixtures.


Lighting fixtures are an ideal carrier for IoT technology in smart buildings, providing ubiquitous location for granular data collection throughout the building while delivering electric power to the sensors. Yet today, only a small percentage of LED fixtures have smart sensors. After the initial installation of LED fixtures, installing a sensor is cost prohibitive, making the later addition of sensors unlikely.


LED light fixtures typically boast a long lifetime of 15 years or more, while IoT and smart sensor technology is evolving rapidly, at a similar pace to that of the mobile phone. This means major IoT technology upgrades will certainly occur throughout the LED fixture’s life. These upgrade cycles for the IoT sensors call for a cost-effective, low-impact method of changing sensors.


The alliance is working to standardise the key interface characteristics needed to make this happen. Both fixture-integrated and external sensors are being addressed. The IoT-Ready standards will include definitions for electrical interfaces, connectors, and mechanical form-factors.


“IoT-based lighting systems have tremendous potential to optimise energy efficiency and bring new kinds of value to the lighting and building industries and beyond,” said Gabe Arnold, technical director at DesignLights Consortium, an alliance member.


“By standardising the interface between these IoT systems and the luminaires they are attached to, the IoT-Ready Alliance is addressing an essential aspect needed to unlock the full technology potential and enable widespread adoption.”


Initial industry participants include: Aruba (a Hewlett Packard Enterprise company); Click Technology Co; DECO Lighting; DesignLights Consortium; Enlighted; ERP Power; Focal Point; MEAN WELL; Orion Energy Systems; Selux; Shenzhen Lighting Control Co; Silergy Corp; Tridonic; Universal Lighting Technologies; and USAI Lighting.



If you liked this, you may wish to look at the following:



Picosun joins forces on next generation lighting project

Aim of project is to bring to market the next generation LED lighting solutions



Smart lighting major player joins ZigBee

The company wants to help advance ZigBee standards as the open global choice in green, connected lighting technology



Brighter lives, smarter cities

Connected LED makes possible quantum gains in energy efficiency



Add New Comment
You must be a member if you wish to add a comment - why not join for free - it takes just 60 seconds!