ao link

You are viewing 1 of 1 articles without an email address.


All our articles are free to read, but complete your details for free access to full site!

Already a Member?
Login Join us now

LoRaWAN gateways power IoT network at Dutch port

Kerlink gateways are being used to piggyback on wind turbines at the Dutch Port of Moerdijk, receiving sensor data and information and securely transferring it to users via the IoT network. 

LinkedInTwitterFacebook
A wind farm was installed in 2020 at the Port of Moerdijk. Photo courtesy: Vattenhall
A wind farm was installed in 2020 at the Port of Moerdijk. Photo courtesy: Vattenhall

Kerlink Gateways are being used to piggyback on wind turbines at the Dutch Port of Moerdijk to power an Internet of Things (IoT) network that serves government agencies, businesses and households 120 metres below the stations.


The iStation LoRaWAN gateways receive sensor data and information in a radius of +/- 25km, or 2,000km2, and securely transfer it to users via the IoT network.

 

IoT network


A large 27-megawatt wind farm that supplies clean energy to more than 27,000 households was installed at the Southern Netherlands municipality in 2020, operated by Vattenfall, one of the European leaders in green energy.


Officials realised the turbine towers could serve an additional purpose by hosting an IoT network that provides key sensor data to the bustling port 120 metres below.


In addition to monitoring air quality, including CO2 emissions, sensors are used for monitoring water levels and open or closed bridges and gates around the port, which helps traffic move efficiently and reduces emissions.

SkyLab hopes the project will help expand the public IoT into the wind industry
SkyLab hopes the project will help expand the public IoT into the wind industry

In addition, the industrial-grade IoT network will be available near the port for shipping, rail and other companies, as well as municipalities, government agencies and individuals, at low cost.


Kerlink’s wind-powered outdoor gateways will run entirely on green electricity. Remy de Jong of SkyLab, which specialises in installing IoT gateways, said the advantage of the height is that the signal is stronger and reaches further.

“Installing a gateway on a windmill – we have never done that before in the Netherlands, and to my knowledge, it hasn’t been done this way anywhere in the world”

“With these great results, we expect to expand the public Internet of Things into the wind industry, for example for on- and off-shore wind turbines. We usually do that on high buildings and towers,” he said.


He added: “When we entered into talks with Port of Moerdijk, we got the idea during a brainstorm of using the wind-farm towers. Installing a gateway on a windmill – we have never done that before in the Netherlands, and to my knowledge, it hasn’t been done this way anywhere in the world.”


The project is Kerlink’s second major deployment in the Netherlands. In 2019, it was part of a joint deployment of a LoRaWAN private IoT network at Amsterdam Airport Schiphol, one of the largest international airports in Europe.


“Kerlink Wirnet iStation IoT gateways are operating 100 metres above the water in what will be an exposed and challenging environment, but this product has repeatedly proven its robust performance and reliability,” said Aurélien Seugnet, Kerlink’s business developer. “Being wind powered also is a key benefit, because they will be out of reach for battery replacements.”

 

You might also like:

LinkedInTwitterFacebook
Add New Comment
You must be a member if you wish to add a comment - why not join for free - it takes just 60 seconds!